A Solvent Based Paint.

It dries to a Medium Sheen Finish.

Vinyl Pool Paint has excellent adhesion and water resistance as well as a tough film.  Vinyl Pool Paint can only be used on unpainted cement, Gunnite or Marbelite surfaces or surfaces previously painted with Vinyl Pool Paint.  The surface must be thoroughly inspected for delamination or disintegration as Vinyl Pool Paint can only be applied on a firm, well prepared substrate.  It cannot be used on fibreglass surfaces.  Where paint other than Vinyl Pool Paint was applied, this paint must then be removed to a sound base.  Do not add waterproofing agents to the cement as this will cause a loss of penetration and adhesion.  Finish the surface of a new cement pool with a wooden trowel, as this will leave the surface similar to that of a 100 grit floor sandpaper.  This will greatly improve the adhesion of the new paint system.  Smooth surfaces must be sanded with 40 grit sandpaper or be acid etched with Titanium Brick Cleaner thinned with 20% water for the required result.  Rinse off with plenty of water and allow to dry properly.

Click here to download Data Sheet!